複合形ステッピングモータ

ステップ角(°)
0.9
1.2
1.8
バイポーラ/ユニポーラ
バイポーラ
バイポーラ/ユニポーラ
ユニポーラ
保持トルク(Ncm) -
保持トルク(oz.in) -
インダクタンス(mH) -
電気抵抗(ohm) -
定格電流(A) -
シャフトタイプ
D-カット
O
キー溝
シングルシャフト
中空
シングルシャフト/デュアルシャフト
シングルシャフト
デュアルシャフト
単軸
シャフト直径(mm)
2.5
3
4
5
6
6.35
8
9
10
12.7
14
19
48
5 mm
Φ3
Φ5
リード数
3
4
5
6
8
16   25   50   75   All  
複合形ステッピングモーター、またはHBステッピングモーターは、可変リラクタンスステッピングモーターと永久磁石ステッピングモーターの機能の組み合わせです。ステッピングモーターのシャフトは、電気コマンドパルスが適切な順序で適用されると、離散的なステップ増分で回転します。HBステッピングモーターは、正確なポジショニング制御のための最も簡単なデバイスです。これらは、デジタル、アナログ、通信などのあらゆる種類の制御信号を介して、位置と速度のさまざまなアプリケーションで広く使用されています。HBモーターには、ベーシックタイプ、エンコーダタイプ、IP65タイプ、ドライバーとコントローラを備えた一体型、ブレーキタイプ、ギヤードタイプなどのさまざまなタイプがあります。

ステップモーターの3つのタイプ:

HB複合形ステッピングモータ: 永久磁石モーターの磁石と、可変リラクタンスモーターの回転子と固定子の歯を組み合わせます。
VR型ステッピングモーター: ローターとステーターに歯がありますが、ローター永久磁石はありません。
PM型ステッピングモータ:ローター用の永久磁石がありますが、軟鉄のローター歯はありません。永久磁石ステップモーターは、「ブリキ缶または缶スタック」と「ハイブリッド」に細分できます。ブリキ缶(缶スタック)は安価なバージョンであり、ハイブリッドバージョンはより高品質のベアリング、より小さなステップ角、より高い出力密度で構築されています。
This is a bipolar 2-phase stepper motor with a 1.8° step angle and a static moment of 4.5 Nm (637.25 oz.in). It operates with a rated current of 6.0A per phase and a phase voltage of 2.1VDC. The motor features a frame size of 86x86mm and a body length of
9244 円
2 in 1 motor and driver, saving space. Full closed loop, precise position and speed control for demanding application requirements. High resolution encoder provides precise positional accuracy. Double pulse control, smooth and precise. Stable performance,
13559 円
This is a bipolar 2-phase stepper motor with a 1.8° step angle and a static moment of 6.8Ncm (9.62 oz.in). It operates with a rated current of 1A per phase and a phase voltage of 2.1V. The motor features a frame size of 28x28mm and a body length of 33mm.
15255 円
This is a bipolar 2-phase stepper motor with a 1.8° step angle and a static moment of 3.13Ncm (4.43 oz.in). It operates with a rated current of 0.6A per phase and a phase voltage of 5.4V. The motor features a frame size of 20x20mm and a body length of 38m
7086 円
These low-cost stepper motors are a unit consisting of stepper motor, encoder and driver, making the system inexpensive and very compact. The position evaluation is done by an optical encoder with 1000 lines, as soon as a position deviation appears, it is
13559 円
This is a 2-phase stepper motor with a 1.8° step angle and a rated torque of 1.8Ncm (2.55 oz.in). It operates with a rated voltage of 3.9VDC and a rated current of 0.6A. The motor features a frame size of 20x20mm and a body length of 30mm. The shaft has a
3080 円
This is a 2-phase bipolar stepper motor with a 1.8° step angle and a holding torque of 6N·cm (8.49 oz·in). It operates within a voltage range of 12-24V and features a rated current of 1A per phase. With a frame size of 28 x 28mm and an 8mm shaft diameter,
11247 円
This is a 2-phase stepper motor with a 1.8° step angle and 44Ncm holding torque, designed for use with integrated controller systems. It has a rated current of 1.68A per phase and operates within a voltage range of 12-40VDC. With a Nema 17 (42mm x 42mm) f
4929 円
The JMC NEMA 34 IHSS86-80-100 integrated closed-loop stepper motor features a compact design for efficient space usage and provides high positioning accuracy without step loss. It utilizes variable current control for efficient operation and ensures smoot
24037 円
The JMC NEMA 34 IHSS86-60-45 closed-loop integrated stepper motor offers a compact design for space-saving installation. It delivers high positioning accuracy without losing steps, utilizing variable current control technology for efficient operation. The
19259 円
2 in 1 motor and driver, saving space. Full closed loop, precise position and speed control for demanding application requirements. High resolution encoder provides precise positional accuracy. Double pulse control, smooth and precise. Stable performance,
16025 円
This is a 2-phase bipolar stepper motor with a 1.8° step angle and a static moment of 5.88Ncm (8.32 oz.in). It operates with a rated current of 0.67A per phase and a phase voltage of 3.75V. The motor features a frame size of 28x28mm, with a motor length o
6162 円
This is a 2-phase bipolar stepper motor with a 1.8° step angle and 2.5Ncm detent torque. It features a 0.5A phase current and operates with a rated voltage of 1.55V. With a Nema 11 (28mm x 28mm) frame size, 3mm diameter shaft, and 4-wire connection.
4622 円
This is a 2-phase bipolar stepper motor with a 1.8° step angle and 59Ncm holding torque. It features a 2A phase current and operates within a voltage range of 12-36V. With a Nema 17 (42mm x 42mm) frame size, 5mm diameter shaft, and D-cut design, this moto
1694 円